Saturday, January 26, 2013

How do GW come up with all these cool names?


Among all the WoC release chatter on Dakka this little gem turned up. Couldnt help but laugh out loud and now I have to write this post and peer between coffee stains on my monitor... Sucks to be me. But at least I'm happy!

Friday, January 11, 2013

Air Necronia, flight WIP942…

… to assimilation-land. This is captain 00110001 and flight engineer 00110010 welcoming you aboard. Have a nice flight and vaporize the living. Thank you.

Oh teh OSL!
A bit of a close up this time. I hope some of you are jumping with joy ;) Airbrushed with the Neo, so it seems it can handle pretty small detail. Still not used to the trigger, it's a bit more "jumpy" compared to the H&S Infinity.

Wednesday, January 9, 2013

Quick Review:
Neo/Iwata CN airbrush

One of the major points I try to tell people when the "I wanna airbrush, what airbrush should I get?"-question pops up is that the cheap ones you see for €50 seldom is a good choice since you run the risk of getting a lemon. And once you bend a needle or loose a seal you have to get a new one instead of just replacing a part. (Yes, I know there are some knockoffs that have their lineage mapped. But meh)

The problem is that you then have to get yourself a €90-150 airbrush just to have warranty and ready access to replacement parts. Until a couple of months ago when the Neo (let's just call it Neo from now on even though it's an Neo for Iwata) arrived on the scene.

Built in Korea apparently, but with Iwata specs, which kinda makes it a less quality controlled Iwata.

Now, I'm a Harder & Steeenbeeekk user. So I'm not really up to spec with how Iwata airbrushes work. But I needed another airbrush for spraying on primer, varnishes and general basecoating. The 0.15 nozzle on the Infinity just doesn't let through enough paint and Im too lazy to change needle every now and then. Perfect excuse for getting myself a Neo!

THE SPECS
Built in Korea or whatever. 0.35mm nozzle (more on that later), exchangeable cups on the CN version. Duble action. Read more over at Iwata/Medea.

THE BRUSH



The Neo really screams "I'm a budget airbrush!" when you see the packaging. No fancy (fake) brushed aluminium presentation case. It even has a hole for a hanger!

In the box there is a small paint cup and a tool for removing the nozzle.



Out of the packaging it's, to my surprise, looking just like any other airbrush out there. So let's take it apart!


If you look carefully you can see my ugly mug on the paint cup lid! I opted not to remove the nozzle since it needed a tool (included) and other reviews said that it was fitted in the workshop and shouldn't be removed unless you really need to. Knowing me I would break it if I tried, so I left it alone.

One thing that I really liked was that the paint cups have their o-rings on the cups instead of on the airbrush body, like the H&S. This means that there will be less gunk to clean out of the o-rings, and hopefully less replacing of o-rings that have gone bad.

After re-assembling the airbrush I sprayed some cleaner through it and loaded it up with some VMA Black Primer. I wont show you the results, but the 0.35mm nozzle produces about the same width lines as the 0.2mm nozzle on my H&S Infinity. The 0.15mm nozzle on my Infinity makes thinner lines (of course) but not that much thinner. Which kinda makes the Neo perfect for any beginner out there. It should be able to handle everything but the smallest of small details.

I'll get back to the Neo in a week or two when I have put it through it's paces. Since I have a bunch of Necron flyers to paint I guess that will be the real test for the Neo. :)

Monday, January 7, 2013

WIP: Immortals


Working in "bulk" like I do with the necrons sure eats up space in your working area. There is absolutely no way to set up the photo equipment properly. These were put on top of the spray booth with a makeshift light setup (that's why they're a bit yellow). I even had to crouch like Quasimodo to be able to see what my camera was aimed at. The stuff I do for you in order to show some WIP photos, eh?

Same technique as on the warriors. Zenithal metallics and all that jazz. Just finished painting the basecoat on their guns and the white stripes [att: pop culture reference] on their heads. Some more highlights and detailing to do before the oil washe(s).

Well that's it. Back to getting metal flakes all over my precious brushes!

Friday, January 4, 2013

Necron metal band...

If there only was a way to have these on the board...

Thursday, January 3, 2013

Some 'crons...


Making bases is boring. Really boring. I tried some fancy ones from Taban Miniatures first. But they looked a bit too fancy. The green gauss thingie steals enough focus as it is. So I had to resort to making bland bases. Cork plates, pigments and vigorous drybrushing really saved the day.

Now there's just 20 more warriors to base. :D